SPORT-CAGE INSTALLED IN MY JEEP WRANGLER (YJ)

Nov. 01, 2005 By Tony Carricaburu

Email
Print
Discuss

Page 1 Page 2 Page 3 Page 4

INSTALL PART 6:

The M.O.R.E. Cage is almost coming to a conclusion. I went ahead and finished the sport-cage's finish by sanding and priming the rest of the bars for a couple coats of paint. Using the same rattle can matched Krylon red I sprayed a first coat on all the bars including the bolts, nuts and other bars that already had paint (basically everything). I then had to wait a couple hours for that coat to some what dry before I sprayed a couple more coats of red on. For some reason this heavy-duty Krylon paint takes forever to dry even at 75 degrees with the sun baking on it.

Around the dash and floor-boards I had to mask off some cardboard pieces so that I didn't get over spray on everything. Behind the bars on the dash side were a little tough to get, being about 2 inches away from the dash, but with a couple distant sprays I was able to mist a couple good coats on. See pictures below for pictures of the cage un-painted and completely painted red.

(click on images for large view)