INTRODUCTION
|
The Kawasaki KX100 is squarely-aimed at that gap between the mini ranks and the pro classes. Featuring a larger frame, the KX100 gives adolescent racers an appropriately-sized machine, so they can focus on riding technique instead of on controlling excessive of power.
The KX100 has larger wheels and tires and more engine displacement than the KX85, and it’s powered by a 99cc liquid-cooled, two-stroke engine that breathes through a 28mm carburetor with a carbon-fiber intake reed valve to aid throttle response, coupled to a smooth-shifting six-speed transmission.
The engine is bolted into a high-tensile steel perimeter frame that has a specially designed gas tank to lower the fuel load, which lowers the center of gravity for improved handling. Adjustable long-travel suspension at both ends helps to smooth even the roughest motocross courses. The 36mm inverted cartridge fork has compression damping adjustment capability and the UNI-TRAK® rear suspension system comes equipped with a shock that is fully adjustable for spring preload, compression and rebound damping. In the braking department, both front and rear discs are mounted with shoulder bolts for easier maintenance.
The KX100 also features aggressive Kawasaki Lime Green and Black graphics with a two-tone seat, just like larger KX models.
|
FEATURES
Liquid-cooled Engine
- Right-hand engine cover provides a separate clutch cover for quick servicing without removing the water pump
- Assures greater reliability
- Bridges between intake and exhaust ports are machined finish for increased durability
- Magneto with lower inertial moment improves low-rpm response
- Rotor comes with rare-earth magnets – the unitized piece is small, light and durable
- Connecting rod big-end bearing has more rigid cage for improved durability
- Intake port shape and cylinder skirt allow cooling air into the crankcase chamber
- Primary gear is secured using a lock-nut to help reduce mechanical noise
- Metafoam gaskets for the generator and water pump covers improve sealing
Kawasaki Integrated Power Valve System (KIPS®)
- KIPS system varies exhaust port height for increased horsepower and torque
- Produces a broad powerband with more low-end torque while retaining excellent top-end power
- Breather added to KIPS cover to improve high-rpm and overrun performance
28mm Keihin Carburetor
- Crescent slide carburetor puts the needle closer to the intake ports for excellent throttle response
- Adjustable for various conditions
Clutch
- Clutch hub rides on needle bearings for smooth action
- Large clutch plates are 119mm in diameter for durability and control
- Clutch-release lever ratio provides light clutch lever action
- Thick clutch basket housing improves durability
footpeg brackets withstand today’s rigorous tracks
- Engine and chassis bolts have rust-resistant coating
Fuel Tank
- Positioned in the frame to lower center of gravity and improve handling
- Features graphics to match larger-displacement KX models
- Fitted with square inset nuts for secure mounting of shrouds and seat base
UNI-TRAK® Rear Suspension
- Swingarm uses large cross-section beams for more rigidity and control
- Swingarm incorporates cast-aluminum drive chain adjuster sections for easy chain adjustments
- Flanged collars at the bearings to protect the seals from mud
- Fully adjustable shock with compression, rebound damping and spring preload adjustments
36mm Inverted Cartridge Fork
- Upper tubes are made of aluminum and are 49.5mm in diameter for excellent control and steering response
- Compression damping is 18-way adjustable
Front and Rear Disc Brakes
- Front brake lever shape offers better feel
- Forged-aluminum rear brake pedal is strong, lightweight and features two seals at the pivot for smooth operation - Clutch plate service cover simplifies maintenance and utilizes a metal-carbon composite gasket
Six-speed Transmission
- Fifth and sixth gears on the input shaft ride on bushings for added reliability
- Positive shifting action and rugged durability
- Allows the engine’s full potential to be realized
- Provides oil level window
- Hard chrome-finished shift forks resist wear and seizure
High-tensile Steel Perimeter Frame
- Same tubing material used on the KX™250
- Wide footpegs for better control, made of cast steel for strength
Front and Rear Wheels
- Rear hub features two wheel bearings on the drive side of the hub for durability
- Thick spokes are used front and rear for stronger wheels, requiring less adjustment
- Light weight aluminum rims
Seat
- Two-tone seat pattern and graphics just like larger KX models
SPECIFICATIONS |
2007 KX100 |
MSRP |
$3,349 |
Engine
Type |
Two-stroke single with KIPS® |
Displacement |
99cc |
Bore and Stroke |
52.5 x 45.8mm |
Cooling |
Liquid |
Carburetion |
Keihin PWK28 |
Induction |
Two-petal reed valve |
Compression
Ratio |
9.6:1 (low speed) – 8.8:1 (high speed) |
Ignition |
Digital CDI |
Transmission |
Six-speed |
Final Drive |
Chain |
Frame |
High-tensile steel perimeter design with subframe member |
Rake / trail |
27 degrees / 4.1 in. |
Front
Suspension/ wheel travel |
36mm inverted telescopic cartridge fork with 18-way compression damping / 10.8 in |
Rear
Suspension/ wheel travel |
UNI-TRAK® single shock system with 4-way compression and 18-way rebound damping plus adjustable spring preload / 10.8 in. |
Front Tire |
70/100x19 |
Rear Tire |
90/100x16 |
Front
Brake |
Hydraulic disc |
Rear
Brake |
Disc |
DIMENSIONS
|
Overall Length |
75.2 in. |
Overall Width |
28.9 in. |
Overall Height |
43.5 in. |
Ground Clearance |
15.0 in. |
Seat Height |
34.3 in. |
Dry Weight |
149.9 lbs. |
Wheelbase |
50.8 in. |
Fuel
Capacity |
1.5 gal. |
OTHER
|
Available
Colors |
Lime Green / Black |
|
|