All fittings are Earl's Steel fittings for their Speed-Flex hose. This is a stainless steel braided hose rated at 450° F and 2000 PSI.
| Item | Part # | Qty | Description |
| 1 | 640603 | 1 | Female 10mmx1 Convex IF (Attaches to hard brake line above axle.) |
| 2 | 6453003 | 1 | 3-way AN Tee with mounting hole. |
| 3 | 600103 | 3 | Straight AN hose end. |
| 4 | 989500 | 2 | Hose clip-in fairlead (attaches hose through the tabs on axle tube) |
| 5 | 600503 | 2 | 30 degree adj. bent banjo. (Can also use a straight banjo #600403) |
| 6 | 610003 | 1 | 10' piece of -3 Speed-Flex hose. |
Notes:
The stock banjo bolts on the brake cylinders fit these banjos.
Don't forget to put the hose fairleads (item 4) on (and in the right direction) before putting both hose ends on.
Earl's provides directions for cutting the hose and attaching the ends. You'll need a couple wrenches, a hack saw or Dremel tool w/ cut-off wheel and some electrical tape. A bench vise is also very helpful when cutting the hose, but isn't absolutely needed
 |
Off-Road.com Newsletter Join our Weekly Newsletter to get the latest off-road news, reviews, events, and alerts! |
Follow @Off-Road
Your Privacy Choices