All late-model HD aftermarket replacement-knuckle kits increase front track width for wheel clearance. Some suspension manufacturers widen the track by as much as 3"; Superlift's cast ductile iron knuckles only increase track by 1.8". Also, the factory front driveshaft is retained with this kit.

Many components are shared between the new knuckle kit and existing bracket system. Both feature load-bearing bracketry that’s laser-cut from .25" plate steel. Full-width control-arm crossmembers are reinforced by kicker braces for additional strength front-to-rear.

To lift the rear, tapered blocks ensure factory ride-quality and load-carrying capacity is retained. For an in-depth comparison between the knuckle and bracket kits, please visit Superlift's website at www.superlift.com or see the company's printed catalog.

Many options are available. The three shock choices are standard Superlift Superide, Superide Select Series (SS) monotubes or Superide Select Series with remote reservoir (SSR). Other extras include a stainless steel skidplate, the TruSpeed speed signal recalibrator, Torque-Max traction bars, and an eXtreme Ring rear diff-cover protector. All Superlift components are covered by a Limited Lifetime Warranty.

For more information, see your nearest authorized dealer or call 800/551-4955 to speak with the sales and tech support staff or contact Superlift Suspension Systems, 300 Huey Lenard Loop Rd., West Monroe, LA 71292, 800/551-4955 toll-free, 318/397-3040 fax, www.superlift.com.