Adding a remote start for Jeep Wrangler not only means you can start the vehicle from a distance, but it is also capable of performing various other tasks such as taking care of the vehicle’s security, controlling the lights, managing the air conditioning system, and much more.

However, in some cases, these extra functionalities in a Jeep Wrangler remote start system need some additional modules to be purchased separately, and may even require a professional to get the installation part done, which can significantly increase the cost of having the entire kit set up and running.

What to Look For?

Before you go and drop your hard-earned money on a remote start for Jeep Wrangler, there are some key differences between models to consider. Here are a few things to keep in mind if you are in the market for such a kit:

Range

It is imperative to check the range of the Jeep Wrangler remote start system. The kits with a longer range can be managed and controlled without any unnecessary delays or disruptions. Some modules can also pair with a smartphone to provide virtually unlimited range.

Design

While complex designs may look nice, they might not be as durable as the simpler ones can prove to be in the long run. Furthermore, a multifaceted remote start for Jeep Wrangler might require the help of a professional services to get installed, thus increasing the overall costing of the complete setup. On the other hand, a kit with a simple design ensures easy and quick installation and convenient operation.

Compatibility

Even though most remote start kits are universal, it is still a good idea to make sure it is fully compatible with your specific Jeep Wrangler model. For instance, some older vehicles might not have an advanced mechanism to interact with the latest remote start systems. In such a case, a different, backward compatible module might be required to add the remote starting feature.

Additional Functions

As mentioned earlier, having some additional functions enabled in a Jeep Wrangler remote start kit might require a couple of modules to be purchased separately, which might put some extra burden on your wallet. Therefore, it would be better to get only the features that are necessary, and are intended to be used regularly.

With all that in mind, here are some of the best Jeep Wrangler remote start gears available.

1. Editor's Choice: MPC Remote Start for Jeep Wrangler

MPC Remote Start for Jeep Wrangler

Compatible with the traditional Key-to-Start Jeep Wrangler JK, the MPC Remote Start is a complete kit that includes all the required cables and switches along with a four-piece toolset for DIY-type installation.

In addition to using the factory key to start the vehicle from a distance, this plug-and-play remote start for Jeep Wrangler can also remotely turn on the defroster/heater and air conditioner to make the driving experience comfortable. This is particularly useful for those of us that live in northern climates where temperatures can feel awfully frosty on a winter morning.

2. Start-X Remote Starter Kit for Jeep Wrangler

Start-X Remote Starter Kit for Jeep Wrangler

This Jeep Wrangler remote start kit by Start-X is compatible with the Jeep Wrangler JK and doesn’t require any extra key for functioning. The plug-and-play equipment comes with a T-harness for neat and quick installation without engaging any paid professional to get the job done.

Post installation, the lock button on the vehicle’s factory key works as a toggle switch, where pressing it three times starts the car, and repeating the sequence turns it off. The available optional supported modules that can be purchased separately include an add-on for cellphones to get unlimited range, a one-button two-way range for up to two kilometers, a four-button two-way long-range for up to two kilometers, and a one-button one-way long-range for up to 2,000 feet.

3. Mopar Remote Start Kit

Mopar

Compatible with 2013-14 Jeep Wrangler JK models, this remote starter kit can be installed only on vehicles with an automatic transmission. The equipment doesn’t need any additional key, and the one that was shipped along with the car itself works well post installation.

Mopar Remote Start Kit can turn on the heater/defroster and air conditioning system of the car from a distance, thus making the atmosphere comfortable before the vehicle hits the road.

4. Start-X Remote Starter Kit (2018-2021)

Start-X Remote Starter Kit (2018-2021)

This remote start for Jeep Wrangler equipment works with Wrangler JL models that have a push-to-start button. In addition, the device can also be installed on Jeep Gladiator models in less than 15 minutes by following the step-by-step instructions explained in the video guide. The remote starter kit can turn on the air conditioning and heater of the vehicle in the summer and winter seasons respectively.

Any user with basic computer knowledge can program this plug-and-play remote starter module using a PC with the Internet Explorer web browser.

5. Omega R&D – Remote Start Module

Omega R&D – Remote Start Module

This universal remote start kit (RS-170-B) works with keyless entry-supported Jeep Wrangler models as well. No additional remotes are required as the equipment works with the factory keys. After the installation, the device can turn the car on or off, enable the virtual alarm, and perform many other tasks.

The module comes with a warranty against any manufacturing defects.

6. Omega R&D – Excalibur Four-Button Two-Way

Omega R&D – Excalibur Four-Button Two-Way

This Excalibur series two-way four-button remote start for Jeep Wrangler (AL-2075-3DB-L) has an operating range of one mile. The USB rechargeable two-way remote controller that comes with the equipment has the vehicle learn mode that automatically learns how the vehicle is used and then functions accordingly.

The module has a 3D motion sensor, onboard temp sensor, and sends real-time alerts about the car’s convenience and security functions.

7. MPC Remote Start (2018-2021)

MPC Remote Start (2018-2021)

This remote start kit from MPC works with Jeep Wrangler JL models that run on gas or diesel, and have a push-to-start button. The plug-and-play equipment comes with a bypass module for remote starting, and the firmware is preloaded with all the necessary set of instructions, hence making it ready to be programmed using a PC and a web browser.

MPC Remote Start doesn’t need any additional key to function as it seamlessly integrates with the one that came with the vehicle itself.

8. Fortin EVO-CHRT5 Stand-Alone Add-On Remote Start

Fortin EVO-CHRT5 Stand-Alone Add-On Remote Start

Almost a one-size-fits-all product, Fortin EVO-CHRT5 Stand-Alone Add-On is a remote start module that works with Jeep Wrangler 2007 to 2018 models having an automatic transmission. The equipment comes with THAR-CHR5 T-harness, and can be programmed using a separate FLASH-LINK to best suit the specific needs.

Conclusion

Even though having a remote start for Jeep Wrangler is a good idea, it is necessary to understand that not all vehicles can have any random system installed. For instance, some remote start kits work only with the Jeep Wrangler models with the conventional Key-to-Start system. On the other hand, there are others that are compatible only with vehicles that have automatic transmission. Therefore, checking the compatibility list and the type of car models such a piece of equipment works with would be a wise approach.

Why should I get a Jeep Wrangler remote start system?

If you want to turn on your Jeep Wrangler from the comfort of your home, having a remote start for Jeep Wrangler is the best choice as many such kits do a lot more than merely starting and stopping the engine from a distance. For example, some remote starters can turn on the defroster/heater and air conditioner of the vehicle remotely. This is useful if you live in a region with extremely cold or hot weather, and want to make the atmosphere of the vehicle comfortable before getting to the driving seat.

Likewise, some additional modules can also be installed and programmed to secure your Wrangler from theft or add smartphone compatibility to manage the vehicle from a long distance.

How do you install a Jeep Wrangler remote start system?

To be honest, it depends on the type of remote starter kit you have purchased. While some of them are plug-and-play with as little as one T-harness and can be installed without any assistance, others can have complex installation processes and should be handled by a skilled professional.

Another aspect of installing a Jeep Wrangler remote start system is buying add-on modules, connecting them to the kit, and then programming them using a computer system and a web browser. Although the step-by-step instructions to get the job done are available in the form of text and video tutorials, people who are not-so-techy might find the process challenging, and therefore the services of a professional could be required.

We are committed to finding, researching, and recommending the best products. We earn commissions from purchases you make using the retail links in our product reviews. Learn more about how this works.