Used Dirt Bike Buying!
Take This Advice, and Go Save Troubles, Money, and Headaches
-
One can always save a mere large sack of
cash buying a used dirt bike, rather than buying new. However, before you give
your money to the used dirt bike seller - BEWARE! What you get is what you
will ride and live with. There are no warranties or returns.
- Nothing is free. If you're going to buy and work on a used dirt bike
bikes, you need to either know, or learn, how to work on them. Shop
charges will eat all money saved over a new dirt bike purchase if you don't
do the work yourself!
- Working on 2-stroke dirt bikes, while time consuming, is easy. Working on
4-strokes is an order of magnitude more difficult and time consuming.
- New dirt bike knobby tires cost at least $65 each for a quality tire.
- New aftermarket plastic fenders will cost at least $30 for a front fender,
and about $35 for a rear fender.
- New plastic side panels cost about $40.
- New plastic radiator shrouds will set one back about $45.
- A new seat cover will cost at least $60.
- New handlebars will range from $35 to $95. It depends what handlebar type
you want. There are oodles to choose from!
- A new and good quality chain and sprocket set may cost $175. NOTE: Always
replace the chain and sprockets together! Purchase O-ring drive chains, if
possible, and quality sprockets. O-ring drive chains and good quality
sprockets have outstanding life spans.
As you can easily tell, if these items are worn or broke, it will be easy to spend at least $500 in replacement parts. This doesn't include any engine or suspension repair costs!
If the seller becomes irritable, and starts screaming at the bike to "go fix itself", it's a dead give away the dirt bike is an utter piece of trash. As you can easily understand, it becomes crucial to be aware of what to look for when buying a used bike to avoid paying a whole bunch more to insure the used machine will perform well.
Now that you found it, is it really worth buying? |
The seller, more often than not, tries to avoid spending a shovel full of cash for replacement parts when selling the bike. The seller is usually attempting to get the buyer to deal with any parts costs. You must come warned, and informed, about what to look out for on a used dirt bike. If you have performance knowledge and monetary value information concerning the machine you're interested in, it doesn't mean the bike should be purchased after you find and look at it. Thoroughly investigate the bikes condition - and save yourself money, time, and an immense abundance of grief! Here's what to do when you find a used dirt bike you wish to purchase from a private party.
Bring a Friend and Ask the Right
Questions!
When dirt bike shopping, bring a friend with you that has some interest in
dirt bikes. Better yet, bring a friend or trusted aquaintance that has dirt
bike experience and knowledge. When inspecting the bike, your partner may have
some different opinions and/or notice things that you may protentially miss or
simply forget.
Bring a buddy
to help you during the purchase. Ignore amateur sales pitches like
this one.
Ask the owner these questions:
"How often do you clean your air filter?" If the answer is,
"After every one or two rides," it's a good bet the owner
understands that proper air filter maintenance is important, and it may
indicate the owner may be maintenance wise. If the answer goes something like,
"Uh, air filter, uh... yea! All the time", go away. The bikes
powerplant is shot.
"How often do you change the transmission oil?" If the answer is something like "Once every 2 to 4 rides," it's a good sign the owner believes in maintenance and the transmission/clutch internals are probably okay. If the bike is a 4-stroke, and the owner isn't changing the engine oil once every 250 to 500 miles, stay away from the bike. The oil in 4-strokes not only lubricates the engine, but the transmission too. It must be changed regularly or engine and transmission life are shortened considerably.
"Where and how often did you ride the bike?" This question can provide some valuable clues as to how the bike has been treated. If the bike has been ridden several times a week then raced on the weekends, you can bet the machine is worn and the machines remaining lifespan may be short. If the bike was trail ridden sporadically on weekends, it may be safe to believe the bike is capable of many more miles.
"Where do you store your dirt
bike?" If the answer is anything but inside a building, forget buying
it. Any bike kept outside didn't get proper care.
Check under
and in anything you can. Interesting clues revealing the bikes
mechanical care may present themselves!
"Did you purchase this bike new, or has it been owned by others?" If the owner/seller doesn't know who used to own the bike, or how many owners that bike has been through, it's a sure thing that the maintenance history is completely unknown. You'll be gambling on the machines reliability if you purchase it. If you're talking to the bikes original owner, the only thing you'll have to worry about is how much the owner may stretch the truth. Try to buy from older owners. Be careful though! Sometimes "older" owners may be selling their kids MX bike.
"Has this bike been modified?" Be sure to ask what modifications were performed and why the owner, or owners, made the modifications. Do NOT buy a motorcycle that has been modified heavily! Especially if the owner brags of the porting work or other such high performance mods. These mods are bike killers, and the owner has probably ridden the bike hard. While discussing modifications, ask the owner what ratio and brand of oil was used for engine, and transmission lubrication. Ask the brand and type filter oil used. Question the fork oil useage and settings. The purpose behind these question is to gather the depth of the individuals knowledge of dirt bike care. What they say to your questions isn't the realvpoint. One should find out what they know. Again, this isn't foolproof, but it can certainly indidicate the owners care of the motorcycle.
Perform these checks on the bike:
If it's possible, place the bike on a stand. (Bring your own bike stand.) Once
the bike is on the stand, get behind the bike, grasp the rear wheel, and try
to wiggle it from side to side. If it wiggles or moves any, the bearings
holding the swingarm and/or rear wheel on the axle are probably bad and need
replacement. This could spell dollars to replace or fix. Move to the front of
the bike, kneel down and grab the front wheel. Do the same to the front wheel
and note any movement. If there's movement, there are bearing problems. Spin
the front and rear wheels while the bike is on the stand. If the wheel wobbles
while spinning, the rim is bent. Often, a person can not tell if the rim is
hopelessly bent just by looking at it.
Put the bike
on a stand and check for any wheel looseness. Kicking the tires doesn't
do anything for you except make you look ridiculous.
Here's a check to perform that even experienced used dirt bike buyers forget to do. Take the radiator cap off and look into the radiator (if the bike is water cooled) and look at the radiator fluid. If the radiator fluid is anything but green, the owner, or owners, have never changed radiator fluid and there could be internal radiator passages that are blocked, thereby reducing the bikes engine cooling capacity. If you don't see any radiator fluid, consider this a red flag warning and start asking more questions.
Start and ride the bike. (If the seller won't let you ride it, don't buy it.) When riding the bike, run the machine through every gear and be sure every gear works! If the bike has a 5-speed transmission and you can only shift 4 times, the machine has big time transmission problems. Note any excessive vibration. If there is enough vibration to be felt through your arms and shoulders, the bike has bearing problems in the cases. (This statement does not apply to any Yamaha YZ 490.) Problems such as those just described are expensive to remedy, and its best to walk away if you note these conditions.
When riding the bike, listen for any loud noticeably loud metal to metal 'slapping' or 'ringing' noises. These noises may indicate cylinder or piston problems.
Bounce up and down on the seat. If you hear loud squeaking noises, or the bikes suspension sticks while bouncing, there are suspension linkage problems. Repairing suspension linkage problems costs money. Sometimes it costs vast quantities of money.
Look closely at the forks and rear
shock. Look for oil seepage or outright oil leakage on both components.
If there's oil leakage, there's seal damage, and it's rather expensive to
replace the seals due to the labor involved. Look for nicks or dents in the
shiny fork tubes and on the shiny rear shock shaft. If there are nicks,
scratches or dents, these will have to be repaired. Oil seals will never last
any reasonable amount of time with these imperfections constantly rubbing
against the seal.
This is a bad
fork seal leak. The fork oil is literally caked on the fork leg.
Take a narrow strip of white construction paper and dip it in the oil filler hole. If the paper comes out with creamy/white looking oil, the bike has a water pump seal leak. If the oil comes out grey, don't write off the bike completely. The bike probably has aluminum clutch plates and these plates contaminate the transmission oil very easily. If the oil comes out black, the owner probably does not change transmission oil very often. Lastly, if the oil comes out tan, either everything is okay, or the owner just changed the transmission oil to fool the prospective buyer.
If possible, take off the flywheel cover on the engine case. Once off, the covers inside and the area surrounding the flywheel/magneto arrangement should be dry. If it's not dry, find out by looking or feeling if the wet stuff is either water or oil. If it's water, the magneto cover was leaking and there could be rusty magneto components lurking in there. If it's oily, the crankshaft seal is leaking and requires replacement. This spells money.
Make sure the frame is checked
carefully. Look for hairline cracks in the metal around welds. Place the bike
on its side and inspect the frame rails under the engine. Are these rails
mashed, rusty, or filled with holes?
The
replacement of items with quality components shows pride in ownership.
The owner of this bike fixed a brke rod problem with a piece of
bailing wire! What do you think the owner thinks of this bike?
Here are some "Rules of Thumb" for parts replacement costs and labor charges: