You can see the axle mounted in the jig in this picture. You can see where I welded some old spindles to the jig tubing . Note the extra 1"x 1" tubes I welded on the ends of the tie rod arms to help counter the jacking force. ( I jacked the whole axle assembly right out of the jig one time because I did not take the time to grind out the weld properly)
You can see the jacking tubes and bottle jacks installed in
this picture.
You can see where you will need to grind and mark the axle in
this picture.
 |
Off-Road.com Newsletter Join our Weekly Newsletter to get the latest off-road news, reviews, events, and alerts! |
Follow @Off-Road
Your Privacy Choices