Arctic Cat ATV & UTV Projects

LATEST Arctic Cat ATV & UTV Projects

• 

  Product Review: Motion Pro's Leakdown Test Kit

  The only way to determine a two- stroke engines' overall health and well being is by performing a leakdown test.

  Oct. 12, 2009
• 

  Project 2009 Suzuki LTZ400: Final Impact

  With nearly $3,500 in after-market upgrades, have we finally built the "perfect" woods racer? It sure ain't bad!

  Sep. 03, 2009
• 

  Project Suzuki LTZ400: Bars and Armor

  With engine and suspension complete, we needed to add some final pieces up-top - and then again, down below.

  Jul. 15, 2009
• 

  Project Suzuki LTZ400: OMF Wheels and X Rex Tires

  While having a plush ride and a bit more under the throttle finger, there has to be some control of the power to the ground. For this part of our build we decided to get into the wheels and tires that deliver the power to the trail.

  Jun. 16, 2009
• 

  Project Suzuki LTZ400: Air Filter and Yoshimura Exhaust

  The quickest way to get more power from any ATV is through adding air and removing the restrictive exhaust with a finely tuned larger one.

  Apr. 29, 2009
• 

  Project Suzuki LTZ400: HLS Suspension

  We will be changing a few items to make this model fit our needs as a woods racer, with a budget mind set to keep our project affordable within reason. Our major changes right off the bat will include suspension.

  Mar. 23, 2009
• 

  How To: DMC Dual Exhaust System for Polaris RZR

  We contacted DMC about their recently-released twin system for the RZR and had one sitting on our doorstep in no time. Along with the dual exhaust system DMC also recommended their EFI module which is tuned to work with this combination. This combination

  Oct. 09, 2008
• 

  Project Weekend Warrior RZR: Wheels and Tires

  In this installment we make a dramatic change in both the looks and handling department, with wheels from Motorsports Alloys and tires from Maxxis. First we need to tell you a little bit about what we chose and why.

  Aug. 29, 2008
• 

  Project DS450 MX: Addressing Width, Height and Safety

  We are now in the middle of the outdoor motocross season, so here is Part 1 of our quest to build a pro level ATV motocross machine from a 2008 Can-Am DS 450.

  Jul. 30, 2008
• 

  Project Polaris RZR Kicks Off

  We want to extend the functionality of the Polaris Ranger RZR and make it more fun and safe for the weekend UTV Rally, trip to the off-road park, or even the sand dunes - without requiring an expert for installations or breaking the bank. Let's kick it of

  Jul. 07, 2008

• 2008 Can-Am DS 450 Review

  We had ridden the pre-production model at the June 2007 release in Tennessee but we wanted to get our hands on a production model and see if it was everything we expected.

  Apr. 22, 2008
• 

  Project Workhorse Can-Am Outlander: Final Ride

  The workhorse has come together and become a master piece in the working world of utility life. Come on in and check out our wrap on the working man's best friend!

  Feb. 12, 2008

• Project WorkHorse Can-Am Outlander: HMF EFI Optimizer

  Our Workhorse has a new exhaust and with the added breathing room we thought we might better add a little more fuel to sweeten the punch

  Oct. 29, 2007

• Project Workhorse Can-Am Outlander: HMF Exhaust

  We have chosen our final products for the Can-Am 650 Outlander Max and the first of these will be a product from the Exhaust engineering department at HMF

  Oct. 08, 2007

• Project Polaris RZR: Part 3 Long Travel Kit

  We try out a new set of EXIT coilovers for our Project RZR. This long travel kit is everything a side by side UTV owner could dream of.

  Sep. 01, 2007

• Eliminate CV Joint Maintenance with High Angle Drive Shafts

  Maintaining CV joints is generally the biggest pain in the butt for the owner of a sand car that is driven hard. Imagine never having to service a CV again!

  Aug. 02, 2007

• Project Polaris RZR: Part 2 Suspension and Power

  It's time for design and prototypes, as the 2008 Polaris RZR hits the workshop. Prototype Exit front shocks feature remote reservoirs and a single progressive rate spring.

  Jul. 23, 2007

• Project Workhorse Can-Am Outlander: Elka Shocks

  After the monsterous Maxxis Bighorns and super trick OMF Billet center wheels in our last issue we at Off-Road felt we needed some upgrades in suspension to control the ride.

  Jun. 25, 2007

• Project: 2008 Polaris Ranger RZR

  If the 2008 Polaris RZR is so good stock, can you imagine how good it will be at the end of this project build up?

  Jun. 07, 2007

• iShock your Suzuki LT-R450

  We have spent many hours on our long-term 2006 Suzuki LT-R450 and we have come to the conclusion that the Suzuki suspension is NOT satisfactory for the amateur/expert or even casual off-road rider.

  Jun. 05, 2007