Off-Road Expo literally has thousands of products on display so narrowing it down to ten is no easy task. While the following products are pretty cool, without a doubt there will be loads more on display at the Off-Road Expo show. Consider the following just a tease of what will be hand in Pomona, California. To get your fill of the latest and greatest in the Off-Road Nation, make sure to attend the show Oct. 3-5th. For further information and to buy tickets visit www.offroadexpo.com

4WS.COM announces the production of headers designed specifically for 2007 and newer Jeep Wranglers with a 5.7, 6.1 or 6.4 liter Hemi engine. The popularity of Hemi engine swaps in new Jeeps facilitated the need for headers that fit the vehicle without modification to the frame or suspension mounts. The headers are mandrel-bent 1.75-inch tube converging in a 3-inch collector. The long-tube design increases low-end torque, when compared to short-tube-style headers or manifolds. The new headers come ceramic coated to reduce under-hood temperatures and increase power. www.4ws.com

Crane Hi Clearance proudly presents the RS60 axle center section.: 110 lbs. (with Chromoly steel cover) of brute strength. Built for those looking for maximum strength from a Dana 60 centersection, the RS60 is extremely beefy. Complete axle assemblies for many applications will be available soon. www.cranehiclearance.com

The Currie RockJock III high pinion RD60 rear end assembly for the 2007+ Jeep JK includes the Currie exclusive RJ III nodular iron housing center, heavy-duty 3 x .250 tubes, thick steel cover, yoke, custom housing ends that accept factory JK disc brakes with ABS and ESP sensors, and new 3/16-inch JK suspension brackets (installed). Also included is the Currie 35-spline performance axle package with the stock JK 5x5-bolt pattern, in addition to a 5x5.5 pattern. The Currie axles utilize massive set 80-axle bearings (50 percent greater capacity than stock). Front ends are also available! www.currieenterprises.com

The Expedition One Trail Series front bumper for the ‘07 and newer Toyota Tundra is comprised of a 3/16-inch and 1/4-inch inner structure, and a 3/16-inch-thick outer skin maximizes strength. Features include integrated feet-forward winch mount, 1-inch thick 3/4 recovery shackle mounts, center hoop, and textured black powder coat. Fits winches rated between 8,000 to 12,500 lbs. Also included are three holes strategically placed on top face of bumper for up to three 8-inch round lights. Integrated 4.75-inch light ports can be used with the stock fog lights, or aftermarket auxiliary lamps. www.exp-one.com

The Atomic Axle will officially be unveiled in California at the Off-Road Expo. This highly innovative engineering design has the ultimate off-road enthusiasts eagerly waiting its official release for purchase. This unique design presents a substantial five inches of clearance more than a stock Dana 60. The distinct design offers a new high-clearance axle with unrivaled strength and is proudly manufactured by Foote Axle & Forge, located in Los Angeles, California. www.footeaxle.com

 

The Genesis 8.5 lighting system was designed by LightForce from the ground up and sets a new benchmark in off-road motorsports lighting. The Genesis is available in 100-watt Halogen and multiple custom HB3 HID bulb versions, from 3000k“Ion Yellow” to standard 5000k white. The Genesis is offered as both computer-designed “Euro Cornering Beam” and traditional “Spot” beams and features a 15 percent larger parabolic reflector,  patented “Hi-Tec” composite housing, internal ballast, hard-coated anti-scratch and static lens, sculpted alloy bezel, Gore-Tex Breather, three-way mounted race support bracket, and a unique four-position base mounting system. All combined, the new lighting system weighs in at only 2.5 pounds for HID models and 2.1 for Xenophot. www.lightforce.com

Get Stroked! Turn a 6.6L GM Duramax to a 7.1L high-output monster. Orange County Diesel now offers a complete turn-key, all-inclusive engine replacement performance package including: precision machine works, parts, motor assembly, and installation of all components (CNC ported cylinder heads, cam, crank, springs, turbo, rods, rings, piston, studs, injectors, electronics, pumps, programming and fluids). www.orangecountydiesel.com

Rubicon Express TJ Rear Radius Arm systems are available in a complete suspension package with front and rear radius arms or as an option for current Rubicon Express long arm systems. Benefits of Rear Radius Long Arm Suspension (patent pending): longer-than-stock chromoly control arms; new suspension mounting points utilizing our three-piece belly skid plate; unique high-clearance, rear-radius, long-arm design; carefully chosen spring rates and shock valving; precision bushing placement, design and material. Rubicon Express systems are engineered to be upgradeable – start with a basic system and upgrade as you go! www.rubiconexpress.com

This CFMOTO Powered UTV is the all-in-one solution for your off-road needs. Here is the long list of what is included for less than $11,000: dual bore exhaust, front color matched bumper with lights, top light bar, color matched sport steering wheel, color matched bucket seats, four-point harness, and long-travel suspension with Fox Shocks. Your only options are four-seater (bucket seats in bed w/ full roll cage, additional $1000) or turbo ($2300). www.desertoys.com

The ready-to-run 1/18-scale radio control Mini-Rock Crawler incorporates many key design principles of full-scale rock crawlers into a 1/18-scale package. The truly innovative Mini-Rock Crawler features multi-link suspension, heavy-duty metal ring and pinion gears, a three-gear center transmission with a spool and slipper, a high-torque motor and an Electronic Speed Control (ESC) that has been tuned specifically for rock crawling with extra drag brake. The Mini-Rock Crawler comes completely assembled and includes everything you need, even the DSM transmitter batteries. Just add rocks! www.losi.com